Receiving unit with sandtrap
FOR PURIFICATION AND SEPARATION OF SCREENINGS AND SAND FROM PROCESS AND WASTEWATER
- COMPACTE BUILT-IN MEASURES
- MAINTENANCE FREE
- LOW ENERGY CONSUMPTION
- IN OR OUTDOOR INSTALLATION
- SEPARATED DISCHARGE OF RESTMATERIAL
- FULL AUTOMATIC
- CAPACITY TO 600 M³/H
- INTERNAL BYPASS
- NO EXPENSIVE CIVIL WORKS
How the system works
As base this RECEIVINGUNIT WITH SANDTRAP TYPE SRSC is equipped with a SNOEK FINESCREEN, a SNOEK SCREW COMPACTOR and a SNOEK SAND CLASSIFIER. Therefore the receiving unit has 2 or 3 outlets: one for the screenings, one for the sand and eventually a third discharge for fat (option). These fine screens are fitted with moving and stationary stepped bar units which gradually extract the captured solids from the liquid flow. Due to their function these self-cleaning fine screens are non-clogging and require low maintenance. As a second step, a built-in SNOEK COMPACTOR takes care of the further dewatering to ± 45% DS, and a volume reduction of ± 55% of the captured screenings. Additional, the filtered waste water can be treated by means of a sand classifier and grease skimmer so that the wastewater can be completely mechanically purified. The drive of the unit can be set in that way that the installation works discontinuous and an optimal result will be achieved.
Fabrication
Standard these RECEIVING UNITS WITH SANDTRAP are made in SS 304 (SS 316 in option) and they are foreseen of a SNOEK FINESCREEN, a SNOEK COMPACTOR and a SNOEK SAND CLASSIFIER.